Mason Chimney Repair · Pinellas County, FL
If your chimney is a framed box with siding or stucco, it has a metal chase cover on top — and in Florida, the original galvanized cover is one of the most common leak sources we see. Flat covers pool water, rust through and leak into the chase. We replace them with custom-sized, sloped stainless steel covers that shed water and stand up to salt air.
Licensed & insured · Same-week service · Serving all of Pinellas County.
Prefab (factory-built) chimneys with rust streaks, pooling water, leaks, or rust inside the firebox.
Measure your chase, fabricate a custom stainless cover with slope and drip edges, and install it with a new storm collar.
All of Pinellas County and the Gulf beaches.
Custom fit, stainless materials, proper slope and stainless fasteners — built for coastal Florida.
WHAT'S INCLUDED
A new chase cover only works if the whole top of the chimney is sealed correctly. We replace every part that keeps water out.
Fabricated to your chase dimensions, not a generic size.
Cross-break or sloped top so water runs off instead of pooling.
Edges that direct water away from the siding and stucco.
The seal around the flue pipe that stops water running down the pipe.
Matching stainless cap compatible with your fireplace system.
Fasteners that won't rust and stain your siding.
Checking the framing and insulation inside for water damage.
Looking for rust or water damage inside the fireplace.
DIAGNOSE IT RIGHT
Many homeowners call about one obvious symptom — water inside, a smoky room, rust, odor, or a gas unit that won’t stay on. The real failure is often higher up. We start with the symptom and find the source before we quote for a repair .
FIREPLACE SIDE · WHAT YOU SEE
The part you see and use every day.
CHIMNEY SIDE · WHERE IT STARTS
Where the problem usually begins.
WHY THEY FAIL
Most prefab fireplaces were built with thin galvanized covers that were never meant to last decades in Gulf Coast weather.
FLAT DESIGN
Flat covers hold water after every rain. Standing water speeds up rust and eventually leaks through the lowest point.
GALVANIZED STEEL
The zinc coating wears off in sun, rain and salt air, leaving bare steel that rusts quickly.
FASTENERS
Covers screwed down through the top create holes for water and rust stains down the chase.
STORM COLLAR
If the storm collar is missing or cracked, water runs down the flue pipe into the firebox.
SIGNS
A failing chase cover usually shows up as rust and water before you ever see the cover itself.
COST FACTORS
Every home is different, so we give a written price after we see the actual problem – no phone quotes pulled from thin air. Here’s what moves the number up or down.
Larger chases need more material.
Stainless steel costs more than galvanized but lasts far longer in salt air.
Slope, cross-breaks, drip edges and multiple flue openings add fabrication time.
Steep or tall roofs take more time to work on safely.
Replacing the cap and storm collar together is usually recommended.
Rotted framing or siding inside the chase may need repair.
The most reliable way to get an accurate number is a same-day inspection: we show you what’s happening, explain what’s urgent and what isn’t, and give you an upfront written price before any work starts.
HOW IT WORKS
No guessing, no scare tactics. We show you what’s happening and explain what actually needs to be fixed.
Masonry, prefab, wood, gas, direct vent, ventless, insert or log set — we confirm exactly what you have.
Firebox, panels, damper, rust, water signs, smoke marks, odor and flame behavior.
Cap, crown, chase cover, flashing, liner, draft and every water-entry point above the room.
We explain what's failing, why it's happening, and which part is driving the symptom.
Damper, firebox, gas unit, cap, chase cover, leak, draft, masonry or prefab — fixed properly
Better draft, less moisture, no odor, and a system that makes sense again.
WHERE WE WORK
Our crews work every part of Pinellas County every week — from Tarpon Springs, East Lake and Palm Harbor in the north, through Dunedin, Clearwater, Safety Harbor, Largo and Seminole, down to St. Petersburg, Gulfport and the Gulf beaches from Indian Rocks to Pass-a-Grille.
COVERAGE
NORTH PINELLAS
CENTRAL PINELLAS
GULF BEACHES & SOUTH
WHY HOMEOWNERS TRUST US
Coastal chimney & fireplace experience
Fully insured in Florida
Inspections & 24/7 emergencies
Written diagnosis & price, no surprises
We stand behind our repairs. If a fix we made doesn't hold, we come back and make it right.
Service areas
Local crews based in St. Petersburg, Seminole, Clearwater and Palm Harbor cover the whole county — mainland neighborhoods, waterfront homes and the barrier islands.
MAIN ROUTES WE RUN DAILY
RELATED SERVICES
OUR LOCAL OFFICES
CHASE COVER REPLACEMENT FAQ
A chase cover is the metal lid on top of a framed prefab chimney. It covers the whole top of the chase and has an opening for the flue pipe and cap.
If your chimney is a framed box covered in siding or stucco (not brick), it is a prefab chimney with a chase cover.
A quality stainless cover can last for decades, far longer than the original galvanized cover — especially near the Gulf.
Rust in a prefab firebox usually means water is coming in from the top — often a rusted chase cover or failed storm collar.
Sealing a rusted cover is a short-term patch. Once a cover rusts through, replacement is the only lasting fix.
It depends on the chase size, material and features. We measure and give an upfront written price before any work starts.
FREE ESTIMATE REQUEST
Tell us what you are seeing and where you are in Pinellas County — we will call you back to schedule.
PINELLAS COUNTY · OPEN 24/7
Water after rain, odor in humidity, smoke in the room, or a gas fireplace acting up —
we find the cause, explain it clearly, and fix the right thing.
Copyright © 2026 Mason Chimney Repair St Pete | All Right Reserved.