If you have ever booked a chimney inspection, you may have been asked whether you want a “Level 1” or “Level 2.” These levels come from the national fire safety standard for chimneys, NFPA 211, which describes three levels of inspection based on what is going on with your chimney.

The quick answer

Level 1 chimney inspection

A Level 1 inspection is the standard yearly check. The inspector examines the readily accessible parts of the chimney, fireplace and connections — the parts you can see without special tools or opening anything up.

What is typically checked:

When it is appropriate: your chimney hasn’t changed, you use it the same way, and it has no known problems.

Level 2 chimney inspection

A Level 2 inspection includes everything in a Level 1, plus a more thorough look at accessible areas — including a camera scan of the entire flue, and accessible attics, crawl spaces and the roof.

A Level 2 is recommended or required when:

Why it matters for home buyers: a general home inspector usually looks at the fireplace from inside the room. Cracked flue tiles, a damaged crown or a rusted chase cover are easy to miss without a camera and a look at the roof. A Level 2 protects you from expensive surprises after closing.

Level 3 chimney inspection

A Level 3 inspection is only needed when a Level 2 shows a serious problem that can’t be fully evaluated without removing parts of the building or chimney — for example, opening a wall or ceiling to check for hidden damage after a chimney fire. It is uncommon, and a good company will only recommend it when there is clear evidence it is needed.

What Florida homeowners should focus on

In Pinellas County, water and corrosion cause more chimney damage than creosote. Whatever level you choose, make sure your inspector pays close attention to:

What you should get after an inspection

A good inspection ends with a written report and photos that explain what is in good shape, what is wearing out and what needs repair — with clear priorities. If repairs are needed, you should receive a written quote, not just a verbal estimate.

How much does a chimney inspection cost?

A Level 2 with a camera scan takes longer and costs more than a Level 1. Roof access, the number of flues and reporting needs also affect price. We quote upfront.

Frequently asked questions

Do I need a Level 2 inspection to sell my house?

NFPA 211 calls for a Level 2 at the time of a property sale. Buyers, agents and insurers often expect one.

Can I get a Level 2 for a gas fireplace?

Yes. Gas venting can crack, corrode or get blocked, and a Level 2 checks the full vent path.

How long does each inspection take?

A Level 1 is usually under an hour. A Level 2 often takes an hour to an hour and a half.

Ready to book? See our chimney inspection service, or read how often you should clean and inspect your chimney.

Need help with your chimney in Pinellas County?

Mason Chimney Repair inspects and repairs chimneys and fireplaces across Pinellas County, from Tarpon Springs and Dunedin to St. Petersburg, Clearwater and the Gulf beaches. We find the real cause, show you photos, and give you a written price before any work starts. Call (727) 710-5681 or request an inspection online.

Leave a Reply

Your email address will not be published. Required fields are marked *

Quick Links
Social
Operating hours
Reach Us

Copyright © 2026 Mason Chimney Repair St Pete | All Right Reserved.