A fireplace can be a great feature in a Florida home, but chimney problems are easy to miss and can be expensive to fix. Many buyers find out about a leaking chase cover, a cracked liner or a failed crown only after they move in.
What a general home inspection usually covers
A general home inspector typically looks at the fireplace from inside the room and the chimney from the ground or the roof edge. That is useful, but it usually doesn’t include:
- A camera scan of the full flue liner
- A close look at the crown, cap or chase cover
- A detailed check of the flashing
- Testing of gas fireplace venting and components
Why a Level 2 chimney inspection matters
The national chimney safety standard (NFPA 211) calls for a Level 2 inspection when a property is sold. A Level 2 includes a camera scan of the flue and a close inspection of accessible areas, including the roof and attic. See chimney inspection levels explained.
Red flags for Florida buyers
Outside
- Rust streaks running down a siding or stucco chimney (often a failed chase cover)
- A missing or rusted cap
- Cracked or crumbling crown, loose bricks or eroded mortar
- Caulk-only flashing or stains on the roof around the chimney
- A leaning chimney or gaps between the chimney and the house
Inside
- Water stains on the ceiling or walls near the chimney
- Rust in the firebox or on the damper
- Cracked firebox panels or firebrick
- A strong musty or smoky smell
- Fresh paint or patching around the fireplace (it may be covering water damage)
- Smoke staining on the face of the fireplace
Gas fireplaces
- Pilot or ignition problems
- Soot on the glass or logs
- Corroded or blocked vent terminations
- Missing manuals or labels
Questions to ask the seller
- When was the chimney last inspected and cleaned?
- Have there been any leaks, repairs or chimney fires?
- Was the roof replaced recently, and was the chimney flashing replaced at the same time?
- Is the fireplace wood-burning, gas or converted?
- Has the fireplace been used regularly?
Know what type of chimney you’re buying
Masonry and prefab chimneys have very different issues. Prefab chimneys in Florida frequently need chase cover replacement; older masonry chimneys often need crown, mortar or liner work. See prefab vs. masonry chimney.
Using the inspection in negotiations
A written chimney report with photos and a repair quote gives you something concrete to bring to the negotiating table — whether that is a price reduction, a seller repair or a credit at closing.
For sellers
A pre-listing chimney inspection lets you fix problems on your terms, or disclose them with a quote in hand, instead of being surprised by a buyer’s inspection.
Frequently asked questions
How long does a home-sale chimney inspection take?
Usually about an hour to an hour and a half, depending on the number of flues and roof access.
Can you inspect on short notice for a closing?
We do our best to schedule quickly for real-estate timelines.
Do condos need chimney inspections too?
Yes, if the unit has a fireplace. Condo fireplaces are usually gas or prefab and still have venting, caps and components that can fail.
Book a chimney inspection for your home purchase or sale.
Need help with your chimney in Pinellas County?
Mason Chimney Repair inspects and repairs chimneys and fireplaces across Pinellas County, from Tarpon Springs and Dunedin to St. Petersburg, Clearwater and the Gulf beaches. We find the real cause, show you photos, and give you a written price before any work starts. Call (727) 710-5681 or request an inspection online.
